高线电压小直流电疲劳检验仪（耐电孤疲劳检验仪）-（换算机控住）

High voltage low current tester (arc resistance tester) - (computer control)

软件命名：耐电弧试验机

Product name: electric arc resistance tester

物品款式：NDH-A

Product model: NDH - A

充分满足规范标准：GB/T 1411-2002《固态物绝缘电阻的原材料耐高压得过低功率焊弧电流的可靠性试验》（等同于IEC  61621-1997）及ASTM D495等基准的请求装修设计制作业的，并具有IEC 149、UL 746A等做实验的时候方式

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

最主要符合超范围及的功能：

本现场实验机是采用用途于直流电机、工业电器落球回弹试验仪,介电击穿强度测定仪和家廷居民用工业电器落球回弹试验仪,介电击穿强度测定仪等制造业的焊工用朔胶、环氧硅橡胶胶和隔热漆等隔热涂料的耐电孤特点综合评价，主使用于固状隔热涂料如：朔胶、薄膜和珍珠棉、环氧硅橡胶、黑云母、工业陶瓷、波璃、隔热油、隔热漆、纸箱等媒质的耐电孤特点测试图片；

本疲劳测试仪由计算出来机把控开机运行，就可以出现当下状况检测程序及检测时候，检测截止后并上传当下状况检测数据信息，并可word打印.标准实验所计划书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 机器为高低三合一设计，中下部为工作文件系统，上端为冲击环境试验箱。

2 本產品用到*新智力调整技艺，可以通过首选程序流程（IEC或ASTM）可自己对其进行耐压，并在苹果电脑上显视冲击试验历程和可是。

3 **耐腐蚀性好，抗干预业务能力强，测试方法gps精性好。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧焊接通断时段测量误差：不低于 ±10ms

2 调压器储电量：2kVA

3 额定容量校正电阻：12.5kV

4 做实验的时候电流值要求：±3%

5 电压调控精准度：±10%  电流大小在测量准确度：1.5%

6 工业对钢材拉伸试验压差：（0.5±0.05）N

7 电级用料：钨棒

8 参比电极高度：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 便用工作环境热度：（23±2）℃

10 选用室内环境干湿度：（50±5）%

11 电：220V±5%  50Hz  10A

12 实验    手段：   国家标准/美标/10 mA 间断/20 mA 间断性/30 mA联续/40 mA维持

13 疲劳试验编译程序一下：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 护肤品款型：

NDH-A    耐焊弧校正仪-微机把握

NDH-B    耐焊弧疲劳试验仪-接触屏掌控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！